Snowboarding And History Essay Research Paper Snowboarding

Snowboarding And History Essay, Research Paper

Snowboarding is the world.s fastest growing winter sport and is set to become

even more popular than skiing. It is still a young sport and there are many people

eager to learn more about the enjoyment the sport has to offer.

Without going to a mountain and taking a few lessons it is hard to fully

appreciate what the sport really is, and the sensation that riding a snowboard

gives. Hopefully, my report will tell everything a person would need to know

about equipment, so that they can go try the sport out for themselves.

The first snowboard ever marketed was produced by Shervin Popper, in 1964.

It was a crude model put together in his garage, after he saw his daughter trying

to go down a hill on a sled standing up. It consisted of two children.s skis

strapped together, with some doweling on the top for foot attraction. His daughter

took it to the local sledding hill, and soon enough all the kids wanted one.

Another pioneer was Dimitrije Milovich, a surfer from the east coast. He made

his invention because of the lack of warm water in the winter. This board also

had no bindings, but it included iron edges. In the early seventies Milovich began

limited production of these custom boards.

In 1977 the main snowboard company for today started production. Jake

Burton made and sold his prototypes with handmade bindings. These included

some elements similar to modern design. Tom Sims also started production of

some boards. In 1979 Tom Sims and Chuck Barfoot created the first board

made of fiberglass.

At the end of the seventies and the beginning of the eighties, the snowboard

began to appear in some sports magazines and on American and Canadian TV.

A beer commercial showed Paul Graves riding a snowboard. This introduced the

snowboard to the public, although it was still considered a strange sport.

Now that snowboards were allowed on some mountains, the board needed to

be redesigned so that it would work on packed snow. Shaped wood can slide

along on a hill of deep powder, and it could turn pretty good, but it still was slow

and hard to turn on packed snow.

In 1980 and 1981 the three main snowboard companies, Burton, Sims, and

John Winterstick began to produce fiberglass boards with polietilene (P-tex)

bases, as well as metal edges. The same year the Struck Brothers produced a

board with two small skis on the bottom. Called the Swingbo, it was easier to

carve and turn on packed snow.

When snowboard companies found out about the importance of flex, sidecut,

and camber, nine basic materials began being used. They could be manipulated

or have substitutions, depending on what the board was supposed to do. These

parts were wood or foam, fiberglass, poly MDI, epoxy matrix, polietilene (a.k.a.

P-tex or PE), flacee or ABS, Fenolo-reinforced poly MDI or P-tex, steel inserts,

and steel with rubber dampening.

Wood or foam makes up the core of the board. Usually the core is made of

different types of wood, stiff and light to make the board flexible and durable.

Wood needs to be laminated vertically so that the glue doesn.t play too important

a role in the board.s performance, and so the board will keep it.s characteristics

over time. This process is more expensive than the process to make a board

with a foam core.

A foam core is cheaper than wood. It can also be produced an a larger scale

easier. The only problem is that it isn.t as durable as a wood core, and it often

needs to be reinforced with materials such as Kevlar.

There are many variations of the size, shape, and placement of the core within

the board. For example, a board with most of the core in the center of the board

would spin easier, because there would be no counterweight to slow the spin.

Fiberglass is used in all boards over and under the core to increase stiffness

and to keep the board from deforming. The process of putting all the layers

together is called lamination. Fiberglass is a woven structure which is usually

“Biaxle,” meaning there are two directions in the weave, but even better is

“Triaxle,” which has three.

Poly MDI is a polymeric matrix that gives the board good flexibility over time.

The epoxy matrix is the glue used to stick parts of the board together in the

laminating process. It has a good shock resistance, is lightweight, and has a long

life of rigidity.

Steel inserts are the holes that you see on the top of a board that has no

bindings on it. They are the holes that bindings screw into. They are imbedded

into the fiberglass and are very strongly rooted into the board. They come in

three basic patterns. The basic 4 by 4 pattern is 8 aligned inserts on each half of

the board. Almost every board uses this pattern. Next is Burton.s 3-d insert

pattern. It only requires that three screws go into the board per binding. The up

<

Внимание, отключите Adblock

Вы посетили наш сайт со включенным блокировщиком рекламы!
Ссылка для скачивания станет доступной сразу после отключения Adblock!

Скачать