Sygate Essay Research Paper SYGATE 311 BUILD

Sygate Essay, Research Paper

SYGATE 3.11 BUILD 556 README

Thank you for trying SyGate 3.11. This document contains important information that you may find useful for installing and using SyGate 3.11. For additional instructions on installing and using SyGate 3.11, please see the SyGate 3.11 online users guide–you can quickly get to it from the help menu within the SyGate Manager application. (Note: a shortcut to the online users guide is indicated by a question mark icon from the SyGate Manager application.)

CONTENTS:

SYSTEM REQUIREMENTS

UPGRADING PREVIOUS VERSIONS

INSTALLATION AND USE

TROUBLESHOOTING

FREQUENTLY ASKED QUESTIONS

CHANGES SINCE THE SYGATE 3.0 VERSION

KNOWN ISSUES WITH THIS RELEASE

HOW TO REGISTER

CONTACT INFORMATION

SYSTEM REQUIREMENTS

- Intel 486, Pentium or equivalent PC.

- Win95 (Rev B or higher), Win98, WinNT 4.0 (SP3 or higher), or Win2000.

- 10 MB or more free disk space

- 32 MB or more available memory.

- Microsoft TCP/IP protocol installed.

- Ethernet network interface card.

- DSL, DirecPC, Cable Modem, ISDN, or Analog Modem (for SyGate server).

- A working Internet account with an Internet service provider.

- Cable or DSL modem service or an analog modem service with Microsoft dial-up networking 1.2 or higher or America Online 4.0 or higher.

Note: Cable and DSL modems require an additional Ethernet adapter on the SyGate server computer.

UPGRADING PREVIOUS VERSIONS

- If you are upgrading SyGate from SyGate 2.0 or SyGate 3.0 software, you will need to stop the SyGate service using the SyGate Manager program, exit the SyGate Manager program completely, then uninstall SyGate completely from your system using either the uninstaller provided or Windows Add/Remove program application.

- If you are using SyGate 3.0 or SyGate 3.1, you do not need to re-enter your registration code after installing SyGate 3.11. If you are installing onto a computer that previously had a registered SyGate version. Your registration information should be retained by your computer even after uninstalling SyGate. However, if you reformatted your hard drive or reinstalled your Windows software, you may need to re-enter the registration information. If your previous versions registration code and serial number fail to work with SyGate 3.11, you should contact your version s distributor to obtain further registration information.

- If you created your own settings for SyGate’s Black and White list (BlackLst.bwl and WhiteLst.bwl) or Apprule.cfg configuration file, you should first backup these files into another directory before uninstalling. If you do not do this, your settings will be eliminated when you uninstall the SyGate software. If you backup your configuration files into another directory and wish to restore your old settings after installing the new version or build, stop the SyGate service using the SyGate Manager program, then exit the SyGate Manager program completely. Then copy the configuration files specified above back into the SyGate directory, overwriting the existing files. Your old configuration settings will then be restored the next time SyGate is started.

INSTALLATION AND USE

It is recommended that you close any other services or applications that may be using your network or modem drivers prior to installing SyGate.

For Windows 95 Users:

It is recommended that you have the Windows 95 version 4.00.950 B or later and Microsoft DUN 1.2 or higher software installed. If you have a version of Windows 95 previous to 4.00.950 B, you should download the Windows 95 Service Pack 1 and Windows Socket Update (Kernel 32) from Microsoft’s Web site at http://www.microsoft.com/windows95. You can check the version of Windows 95 you are using from the general tab of the system control panel.

For Windows 98 SE Users:

SyGate will currently not work with Windows 98 SE if Internet Connection Sharing (ICS) is installed. To check if Internet Connection sharing is installed, go to the Windows tab of the add/remove programs control panel and look in details for the networking items. If Internet connection sharing is enabled, deselect this option and restart the computer prior to installing SyGate.

For Windows NT 4.0 Users:

SyGate 3.11 will currently not work with Windows NT RRAS (routing and remote access services update). The standard RAS services installed with Windows NT works well with all versions of SyGate. To check if RRAS is installed, go to the routing tab of TCP/IP properties in the network control panel to see if enable IP forwarding is grayed out. If it is, we recommend removing RRAS or reinstalling Windows NT 4.0. For SyGate Server to function properly on Windows NT 4.0, make sure that “IP forwarding” is not enabled in the routing tab of TCP/IP properties in the network control panel. In addition, verify that “enable DNS for WINS resolution” is not enabled in the WINS Address tab of TCP/IP properties in the network control panel. We recommend that immediately before and after installing SyGate on a Windows NT 4.0 system, that you reapply the Windows NT service pack you are using.

For DirecPC Users:

If the networked client computers

Внимание, отключите Adblock

Вы посетили наш сайт со включенным блокировщиком рекламы!
Ссылка для скачивания станет доступной сразу после отключения Adblock!

Скачать